Oil Flow Meter

Product Details:

The measurement part of oval gear flow meter is posed by two elliptical gears mesh with each other and its shell (measuring room).The figure shows that the flow meter works by two elliptical gears to mesh with each other, its working process are as follows: P1 in the figure shows the pressure of liquid from inlet side, to show the outlet pressure, the bottom rotor has no rotating torque even it effected the liquid pressure, but the above gears will move by the rotating pressure .ln the status of the above gears driving gear, and the bottom gear is driven gear. both of these two gears have rotating torque by the liquid press u/'e, and they move with the direction of the arrow to space The gear space is opposite to, the bottom gear is driving gear, and above gear is driven gear. The bottom gear pushes the liquid out from the half moon space under the liquid press pushes liquid volume four times of "measurement room". So, as long as the rotation of gears, the liquid volume can be counted.

MATERIAL OF CONSTRUCTION:

 

Body                : Aluminium Anodise 

Rotor/Shaft     : Aluminium Anodize 

Connection      : Thread (F).

FEATURES:

·         Working principle: Oval gear positive displacement

·         Mechanical Flow Meter

·         Available and Reset type

·         Leak proof & Dry totalised

·         Maximum working pressure: 2 MPa = 20 bar

·         Fluid &Ambient temperature: -10 to 80°C

·         Accuracy (standard installation position) : 0.5% FSD

·         Repeatability: 0.03%

·         Use in Fuel, kerosene, Gasoline, diesel, light oil, heavy oil, petrol ,LDO, HDO, wine, bear alcohol, milk, juice, coffee  all chemical and pharmaceutical drug.

·         Always put a suitable strainer before the fuel flow meter.

Additional Information:

• Production Capacity: 50 Nos per month
• Delivery Time: 1 week

Product Details:

Product Description

Mechanical type Oval Gear Flow Meter is a kind of positive displacement Meter to measure the liquid flow or instantaneous flow of the Pipe tube. It is a kind accumulate meter with reset option. It is used to measure flow of fuel like kerosene, diesel petrol & oil kind liquid but is forbidden to measure corrosive liquid.

Features:

• Highly sensitive to low flow rates and very accurate over its entire flow range
• Vacuum sealed
• Leak proof and dry Totaliser
• Self-lubricating gears
• Long maintenance free working life

Specification:

 

Additional Information:

• Production Capacity: 50 Number per month
• Delivery Time: 1 WEEK

Product Details:

Product Description: Mechanical type Oval Gear Flow Meter is a kind of positive displacement Meter to measure the liquid flow or instantaneous flow of the Pipe tube. It is a kind accumulate meter with reset option. It is used to measure flow of fuel like kerosene, diesel petrol & oil kind liquid but is forbidden to measure corrosive liquid. Features:• Highly sensitive to low flow rates and very accurate over its entire flow range• Vacuum sealed• Leak proof and dry Totaliser• Self-lubricating gears• Long maintenance free working life

Material of Construction: Rotor: Aluminium Anodize / Stainless Steel Flowmeter Body: Aluminium O-ring: NBR/Viton / Silicon Shaft: Stainless Steel

Additional Information:

• Production Capacity: 50 pieces per month
• Delivery Time: 4 days

Product Details:

Oval gear flowmeter belongs to a positive displacement flowmeter, in the flow meter is a class of high accuracy. The flow meter uses precision gears to make accurate measurements.

Features:

It is simple to install and easy to maintain.

The scene showed zero back. The pointer indicates the flow, and the double value shows the single and cumulative flow respectively.

 

The workmanship is exquisite. Multi-process construction, strong pressure resistance.

•Working principle: Oval gear positive displacement

•Mechanical Flow Meter

•Available and Reset type

•Leak proof & Dry totalised

•Maximum working pressure: 3-30 bar

•Fluid &Ambient temperature: -20 to 80°C

•Accuracy (standard installation position): 0.5% FSD

•Repeatability: 0.03%

•Used in Fuel, kerosene, Gasoline, diesel, light oil, heavy oil, petrol, LDO, HDO, 

•Always put a suitable strainer before the fuel flow meter.

 

Body: CI

Rotor/Shaft: Cast iron / Cast steel / Stainless steel / Aluminum

Connection: FLANGED

O-ring: NBR/VITON/SILICON

Shaft : Stainless Steel

 

Tips: Oval Gear Flow Meter Using Tips

 

Clean the line. The new pipeline should be cleaned before operation, and often then washed with solid flow to remove residual welding chips, dirt, etc. At this time, the front and rear stop valves of the instrument should be closed to let the liquid flow through the bypass pipe. If there is no bypass pipe, install short pipe instead.

Exhaust the gas. Usually after the solid liquid sweeps, there is still a lot of air left in the pipeline. With the pressure operation, the air flows through the positive displacement flowmeter at a higher velocity, and the movable measuring element may run too fast, damaging the shaft and bearing.

Additional Information:

• Production Capacity: 25 Number per month
• Delivery Time: 1 week
• Packaging Details: BOX

Product Details:

Digital diesel Oil Oval Gear positive displacement Flow Meter

Oval gear fuel flow meter is a positive displacement volumetric flow meter,
available with Pulse output.

positive displacement flow measurement has accuracy and precision teethed two oval shape gear, Gear rotate when flow pass on measuring chamber and Magnetic pickup sensor/ Hall sensor use for measuring rotation of gear, and each rotation equal to fix value of fluid volume,

DIGITAL FUEL FLOW METER AVAILABLE WITH :

 

• Aluminum anodize
• Pulse output
• Panel mount digital display on request
• Bsp female thread end

TECHNICAL SPECIFICATION:

Working principle: oval gear positive displacement
Accuracy (standard installation position) : ±0.1% FSD or 0.5%RS
Repetability :0.01 %

MAXIMUM WORKING PRESSURE:

MPa = 50 bar for aluminum body

MPa = 250 bar for s.s. body on request

Fluid &Ambient temperature: -10 to 80°C

Power voltage: 5 – 24V DC

MATERIAL OF CONSTRUCTION:

Rotor and casing: Aluminum anodize

O-ring: NBR/VITON/SILICON

Shaft: Stainless Steel/ hastelloy

PRODUCT APPLICATION:

 

• Fuel
• Oil
• Acid & Chemical
• High Viscosity Liquid

Additional Information:

• Delivery Time: 1 week