Glass Tube Rotameter

Product Details:

Product Description:

Operating Principle:

Variable-area flow meters, often called rotameters, consist essentially of a tapered tube, a float and scaled indicator as you see in the figure below. Although classified as differential pressure units, they are, in reality, constant differential pressure devices. Flanged-end or screwed-end fittings provide an easy means for installing them in pipes. When there is no flow, the float rests freely at the bottom of the tube. As the fluid enters the bottom of the tube, the float begins to rise. The float material is selected so as to have a density higher than that of the fluid and the position of the float varies directly with the flow rate. Its exact position is at the point where the differential pressure between the upper and the lower surfaces balance the weight of the float.

 

Applications:

 

· Hot and cold water as well as air flow measurement in air conditioning

· Medium and large line measurement in general process industry

· Cooling water lines

· Water treatment process

· Pure and ultra-pure water production facilities

· Testing of firefighting pumps

· Testing of blowers 

STANDARD FEATURES:

 

Various Material of Construction

Line Size                     : 15 NB to 100 NB

Connection                 : BSP (M), BSP (F), TC END, Flanged

Ranges                        : 2.0 LPH to 30000 LPH

Face-To-Face Distance  : 350mm, 450mm,500mm

Accuracy                     : +/- 2% of Full Scale

Measuring Span           : 1:10

Glass                           : Borosilicate

Float                            : SS-316 , PTFE                             

Easy to Maintain and Replace

Suitable for on Line Installation

Single Piece (jointless) PTFE / PP claded end connections

Heavy Duty Design with Maximum Visibility

Float is provided with PTFE Indicating Ring which minimizes breakage of Glass Tube.

 

Additional Information:

• Item Code: JM
• Production Capacity: 500 Nos Per Month
• Delivery Time: 1 week
• Packaging Details: Wooden Box

Product Details:

Product Description: 

Operating Principle:

Variable-area flow meters, often called rotameters, consist essentially of a tapered tube, a float and scaled indicator as you see in the figure below. Although classified as differential pressure units, they are, in reality, constant differential pressure devices. Flanged-end or screwed-end fittings provide an easy means for installing them in pipes. When there is no flow, the float rests freely at the bottom of the tube. As the fluid enters the bottom of the tube, the float begins to rise. The float material is selected so as to have a density higher than that of the fluid and the position of the float varies directly with the flow rate. Its exact position is at the point where the differential pressure between the upper and the lower surfaces balance the weight of the float.

Applications:
· Hot and cold water as well as air flow measurement in air conditioning

· Medium and large line measurement in general process industry

· Cooling water lines

· Water treatment process

· Pure and ultra-pure water production facilities

· Testing of firefighting pumps

· Testing of blowers 

STANDARD FEATURES:

Various Material of Construction

Line Size                     : 15 NB to 80 NB

Connection                 : BSP (M), BSP (F), TC END, Flanged

Ranges                        : 2.0 LPH to 30000 LPH

Face-To-Face Distance: 350mm, 450mm,500mm

Accuracy                     : +/- 2% of Full Scale

Measuring Span         : 1:10

Glass                           : Borosilicate

Float                            : SS-316 , PTFE                             

Easy to Maintain and Replace

Suitable for on Line Installation

Single Piece (jointless) PTFE / PP claded end connections

Heavy Duty Design with Maximum Visibility

Float is provided with PTFE Indicating Ring which minimizes breakage of Glass Tube.

Additional Information:

• Production Capacity: 500 Number per month
• Delivery Time: 4 days

Product Details:

Product Description: 

Operating Principle:

Variable-area flow meters, often called rotameters, consist essentially of a tapered tube, a float and scaled indicator as you see in the figure below. Although classified as differential pressure units, they are, in reality, constant differential pressure devices. Flanged-end or screwed-end fittings provide an easy means for installing them in pipes. When there is no flow, the float rests freely at the bottom of the tube. As the fluid enters the bottom of the tube, the float begins to rise. The float material is selected so as to have a density higher than that of the fluid and the position of the float varies directly with the flow rate. Its exact position is at the point where the differential pressure between the upper and the lower surfaces balance the weight of the float.

Applications:
· Hot and cold water as well as air flow measurement in air conditioning

· Medium and large line measurement in general process industry

· Cooling water lines

· Water treatment process

· Pure and ultra-pure water production facilities

· Testing of firefighting pumps

· Testing of blowers 

STANDARD FEATURES:

Various Material of Construction

Line Size                     : 15 NB to 80 NB

Connection                 : BSP (M), BSP (F), TC END, Flanged

Ranges                        : 2.0 LPH to 30000 LPH

Face-To-Face Distance: 350mm, 450mm,500mm

Accuracy                     : +/- 2% of Full Scale

Measuring Span         : 1:10

Glass                           : Borosilicate

Float                            : SS-316 , PTFE                             

Easy to Maintain and Replace

Suitable for on Line Installation

Single Piece (jointless) PTFE / PP claded end connections

Heavy Duty Design with Maximum Visibility

Float is provided with PTFE Indicating Ring which minimizes breakage of Glass Tube.

Additional Information:

• Production Capacity: 200 Number per month
• Delivery Time: 4 days

Product Details:

Product Description: 

Operating Principle:

Variable-area flow meters, often called rotameters, consist essentially of a tapered tube, a float and scaled indicator as you see in the figure below. Although classified as differential pressure units, they are, in reality, constant differential pressure devices. Flanged-end or screwed-end fittings provide an easy means for installing them in pipes. When there is no flow, the float rests freely at the bottom of the tube. As the fluid enters the bottom of the tube, the float begins to rise. The float material is selected so as to have a density higher than that of the fluid and the position of the float varies directly with the flow rate. Its exact position is at the point where the differential pressure between the upper and the lower surfaces balance the weight of the float.

Applications:
· Hot and cold water as well as air flow measurement in air conditioning

· Medium and large line measurement in general process industry

· Cooling water lines

· Water treatment process

· Pure and ultra-pure water production facilities

· Testing of firefighting pumps

· Testing of blowers 

STANDARD FEATURES:

Various Material of Construction

Line Size                     : 15 NB to 80 NB

Connection                 : BSP (M), BSP (F), TC END, Flanged

Ranges                        : 2.0 LPH to 30000 LPH

Face-To-Face Distance: 350mm, 450mm,500mm

Accuracy                     : +/- 2% of Full Scale

Measuring Span         : 1:10

Glass                           : Borosilicate

Float                            : SS-316 , PTFE                             

Easy to Maintain and Replace

Suitable for on Line Installation

Single Piece (jointless) PTFE / PP claded end connections

Heavy Duty Design with Maximum Visibility

Float is provided with PTFE Indicating Ring which minimizes breakage of Glass Tube.

Additional Information:

• Production Capacity: 200 Number per month
• Delivery Time: 1 week

Product Details:

Being a client centric firm, we always focus on improving our excellence in manufacturing and exporting a wide array of Low Flow Rotameter. All our provided meters are considered as the ideal and powerful devices that are useful for measuring flowing gases and liquids. These rotameters are delivered to clients end without wasting their precious time. It can be easily availed from us in standard as well as in custom specifications. 

We provide you with a full range of products, such as purging glass tube rotameters, industrial rotameters, low flow rotameters, principal rotameters, and microscopic glass tube rotameters. We manufacture and provide a high-quality Low Flow Rotameter as part of our varied product line. The provided rotameter, which can measure low flow rates of liquids and gases, is made available to consumers in large quantities after being examined to industry standards. Our Rota metres are made from premium materials and come in a variety of sizes, shapes, and models. Additionally, the provided Rota metre is available in a variety of technical configurations and tailored solutions.

 

Variable Area Flow For typical in-line metering applications (i.e. for Gas & Liquid), Purge Glass Tube Rotameters are designed for low flow measurement and for purging applications. These come in glass tube and acrylic body tube designs. These operate according to the variable area principle. The fluid flowing from bottom to top allows the float to freely glide up and down the tapered Acrylic Body Tube OR Glass Tube. The float is placed in a position where the weight of the float and the buoyancy forces are proportionately balanced. The measure of the instantaneous flow rate is the vertical position of the float as shown by the scale.

Low Flow Rotameter Suitable for measurement of low flow rate of liquid or gases.

We are one of the leading manufacturers of Low Flow Rotameter, supplier of Low Flow Rotameter, exporter of Low Flow Rotameter in Maharashtra, India.

 

CONNECTION: Top-Bottom, Rear / as per requirement in SS Screwed nozzle

                                     Or Hosepipe Connection are offered on request.

MATERIAL OF CONSTRACTION: Borosilicate fitted in SS.304 / Wetted Parts SS.316 & Acrylic.

Range:  Between 0.2 to 200 LPH of water of ambient temp. 15 to 5000 of air at BSP & NPT

 

Low Flow Rotameter Accessories: Build in Needle Valve & Without Valve & High & Low Flow Alarms & Gang Rotameter also manufacturer. 

Additional Information:

• Production Capacity: 300 Number per month
• Delivery Time: 1 week
• Packaging Details: Box

Product Details:

Product Description : Established in the year 2005, "Jaipur Manometer" focused on to provide effective high quality products. We have evolved Manufacturing a wide range of, Glass Tube Rotameter. We strive to achieve high customer satisfaction while acknowledging their varied needs in the most effective manner. Our products are highly acknowledged and acclaimed for their longer life, fine finish, and precise dimensions. Our organization is successful in retaining the belief and trust of the clients due to our association with reliable merchants of the industry.

OPERATING PRINCIPLE:Variable-area flow meters, often called rotameters, consist essentially of a tapered tube, a float and scaled indicator as you see in the figure below. Although classified as differential pressure units, they are, in reality, constant differential pressure devices. Flanged-end or screwed-end fittings provide an easy means for installing them in pipes. When there is no flow, the float rests freely at the bottom of the tube. As the fluid enters the bottom of the tube, the float begins to rise. The float material is selected so as to have a density higher than that of the fluid and the position of the float varies directly with the flow rate. Its exact position is at the point where the differential pressure between the upper and the lower surfaces balance the weight of the float.

Applications:· Hot and cold water as well as air flow measurement in air conditioning· Medium and large line measurement in general process industry· Cooling water lines· Water treatment process· Pure and ultra-pure water production facilities· Testing of firefighting pumps· Testing of blowers

STANDARD FEATURES:Various Material of ConstructionLine Size : 15 NB to 80 NBConnection : BSP (M), BSP (F), TC END, FlangedRanges : 2.0 LPH to 30000 LPHFace-To-Face Distance: 350mm,400mm, 450mm,500mmAccuracy : +/- 2% of Full ScaleMeasuring Span : 1:10Glass : BorosilicateFloat : SS-316 , PTFEEasy to Maintain and ReplaceSuitable for on Line InstallationSingle Piece (jointless) PTFE / PP claded end connectionsHeavy Duty Design with Maximum VisibilityFloat is provided with PTFE Indicating Ring which minimizes breakage of Glass Tube.
Rotameters can be configured to either measure liquid or gas flow. Measuring the flow of liquids and gases is a critical need in many industrial plants. In some operations, the ability to conduct accurate flow measurements is so important that it can make the difference between making a profit and taking a loss. In other cases, inaccurate flow measurements or failure to take measurements can cause serious (or even disastrous) results. The media is most likely liquid, gas, or steam. It is important to understand the nature of the fluid, such as its corrosive properties, concentration, presence of entrained solids, and the density and viscosity of the fluid in the system.

Mounting Options Rotameters should always be mounted vertically and with the widest end of the taper at the top. Mounting options for rotameters include insertion types, in-line flanged, in-line threaded, and in-line clamp.
• Insertion flow meters are inserted perpendicular to flow path. They usually require a threaded hole in the process pipe or other means of access.
• In-line flanged flow meters are inserted parallel to the flow path between two pieces of existing flanged process pipes.
• In-line threaded flow meters are inserted parallel to the flow path and threaded into two existing process pipes. NPT is the most common thread type.

Additional Information:

• Production Capacity: 200 Number per month
• Delivery Time: 4 days

Product Details:

Product Description : Established in the year 2005, "Jaipur Manometer" focused on to provide effective high quality products. We have evolved Manufacturing a wide range of, Glass Tube Rotameter. We strive to achieve high customer satisfaction while acknowledging their varied needs in the most effective manner. Our products are highly acknowledged and acclaimed for their longer life, fine finish, and precise dimensions. Our organization is successful in retaining the belief and trust of the clients due to our association with reliable merchants of the industry.

OPERATING PRINCIPLE:Variable-area flow meters, often called rotameters, consist essentially of a tapered tube, a float and scaled indicator as you see in the figure below. Although classified as differential pressure units, they are, in reality, constant differential pressure devices. Flanged-end or screwed-end fittings provide an easy means for installing them in pipes. When there is no flow, the float rests freely at the bottom of the tube. As the fluid enters the bottom of the tube, the float begins to rise. The float material is selected so as to have a density higher than that of the fluid and the position of the float varies directly with the flow rate. Its exact position is at the point where the differential pressure between the upper and the lower surfaces balance the weight of the float.

Applications:· Hot and cold water as well as air flow measurement in air conditioning· Medium and large line measurement in general process industry· Cooling water lines· Water treatment process· Pure and ultra-pure water production facilities· Testing of firefighting pumps· Testing of blowers

STANDARD FEATURES:Various Material of ConstructionLine Size : 15 NB to 80 NBConnection : BSP (M), BSP (F), TC END, FlangedRanges : 2.0 LPH to 30000 LPHFace-To-Face Distance: 350mm,400mm, 450mm,500mmAccuracy : +/- 2% of Full ScaleMeasuring Span : 1:10Glass : BorosilicateFloat : SS-316 , PTFEEasy to Maintain and ReplaceSuitable for on Line InstallationSingle Piece (jointless) PTFE / PP claded end connectionsHeavy Duty Design with Maximum VisibilityFloat is provided with PTFE Indicating Ring which minimizes breakage of Glass Tube.
Rotameters can be configured to either measure liquid or gas flow. Measuring the flow of liquids and gases is a critical need in many industrial plants. In some operations, the ability to conduct accurate flow measurements is so important that it can make the difference between making a profit and taking a loss. In other cases, inaccurate flow measurements or failure to take measurements can cause serious (or even disastrous) results. The media is most likely liquid, gas, or steam. It is important to understand the nature of the fluid, such as its corrosive properties, concentration, presence of entrained solids, and the density and viscosity of the fluid in the system.

Mounting Options Rotameters should always be mounted vertically and with the widest end of the taper at the top. Mounting options for rotameters include insertion types, in-line flanged, in-line threaded, and in-line clamp.
• Insertion flow meters are inserted perpendicular to flow path. They usually require a threaded hole in the process pipe or other means of access.
• In-line flanged flow meters are inserted parallel to the flow path between two pieces of existing flanged process pipes.
• In-line threaded flow meters are inserted parallel to the flow path and threaded into two existing process pipes. NPT is the most common thread type.

Additional Information:

• Production Capacity: 100 Number per month
• Delivery Time: 4 days

Product Details:

Product Description:

Operating Principle:

Variable-area flow meters, often called rotameters, consist essentially of a tapered tube, a float and scaled indicator as you see in the figure below. Although classified as differential pressure units, they are, in reality, constant differential pressure devices. Flanged-end or screwed-end fittings provide an easy means for installing them in pipes. When there is no flow, the float rests freely at the bottom of the tube. As the fluid enters the bottom of the tube, the float begins to rise. The float material is selected so as to have a density higher than that of the fluid and the position of the float varies directly with the flow rate. Its exact position is at the point where the differential pressure between the upper and the lower surfaces balance the weight of the float.

 

Applications:

 

· Hot and cold water as well as air flow measurement in air conditioning

· Medium and large line measurement in general process industry

· Cooling water lines

· Water treatment process

· Pure and ultra-pure water production facilities

· Testing of firefighting pumps

· Testing of blowers 

STANDARD FEATURES:

 

Various Material of Construction

Line Size                     : 15 NB to 100 NB

Connection                 : BSP (M), BSP (F), TC END, Flanged

Ranges                        : 2.0 LPH to 30000 LPH

Face-To-Face Distance  : 350mm, 450mm,500mm

Accuracy                     : +/- 2% of Full Scale

Measuring Span           : 1:10

Glass                           : Borosilicate

Float                            : SS-316 , PTFE                             

Easy to Maintain and Replace

Suitable for on Line Installation

Single Piece (jointless) PTFE / PP claded end connections

Heavy Duty Design with Maximum Visibility

Float is provided with PTFE Indicating Ring which minimizes breakage of Glass Tube.

Additional Information:

• Item Code: JM-
• Production Capacity: 200 Number per month
• Delivery Time: 4 days
• Packaging Details: Box

Product Details:

Product Description: 

Operating Principle:

Variable-area flow meters, often called rotameters, consist essentially of a tapered tube, a float and scaled indicator as you see in the figure below. Although classified as differential pressure units, they are, in reality, constant differential pressure devices. Flanged-end or screwed-end fittings provide an easy means for installing them in pipes. When there is no flow, the float rests freely at the bottom of the tube. As the fluid enters the bottom of the tube, the float begins to rise. The float material is selected so as to have a density higher than that of the fluid and the position of the float varies directly with the flow rate. Its exact position is at the point where the differential pressure between the upper and the lower surfaces balance the weight of the float.

Applications:
· Hot and cold water as well as air flow measurement in air conditioning

· Medium and large line measurement in general process industry

· Cooling water lines

· Water treatment process

· Pure and ultra-pure water production facilities

· Testing of firefighting pumps

· Testing of blowers 

STANDARD FEATURES:

Various Material of Construction

Line Size                     : 15 NB to 80 NB

Connection                 : BSP (M), BSP (F), TC END, Flanged

Ranges                        : 2.0 LPH to 30000 LPH

Face-To-Face Distance: 350mm, 450mm,500mm

Accuracy                     : +/- 2% of Full Scale

Measuring Span         : 1:10

Glass                           : Borosilicate

Float                            : SS-316 , PTFE                             

Easy to Maintain and Replace

Suitable for on Line Installation

Single Piece (jointless) PTFE / PP claded end connections

Heavy Duty Design with Maximum Visibility

Float is provided with PTFE Indicating Ring which minimizes breakage of Glass Tube.

Additional Information:

• Production Capacity: 200 Number per month
• Delivery Time: 4 days

Product Details:

Product Description: 

Operating Principle:

Variable-area flow meters, often called rotameters, consist essentially of a tapered tube, a float and scaled indicator as you see in the figure below. Although classified as differential pressure units, they are, in reality, constant differential pressure devices. Flanged-end or screwed-end fittings provide an easy means for installing them in pipes. When there is no flow, the float rests freely at the bottom of the tube. As the fluid enters the bottom of the tube, the float begins to rise. The float material is selected so as to have a density higher than that of the fluid and the position of the float varies directly with the flow rate. Its exact position is at the point where the differential pressure between the upper and the lower surfaces balance the weight of the float.

Applications:
· Hot and cold water as well as air flow measurement in air conditioning

· Medium and large line measurement in general process industry

· Cooling water lines

· Water treatment process

· Pure and ultra-pure water production facilities

· Testing of firefighting pumps

· Testing of blowers 

STANDARD FEATURES:

Various Material of Construction

Line Size                     : 15 NB to 80 NB

Connection                 : BSP (M), BSP (F), TC END, Flanged

Ranges                        : 2.0 LPH to 30000 LPH

Face-To-Face Distance: 350mm, 450mm,500mm

Accuracy                     : +/- 2% of Full Scale

Measuring Span         : 1:10

Glass                           : Borosilicate

Float                            : SS-316 , PTFE                             

Easy to Maintain and Replace

Suitable for on Line Installation

Single Piece (jointless) PTFE / PP claded end connections

Heavy Duty Design with Maximum Visibility

Float is provided with PTFE Indicating Ring which minimizes breakage of Glass Tube.

Additional Information:

• Production Capacity: 200 Number per month
• Delivery Time: 1 week
• Packaging Details: Box